Astro Pneumatic Tool 4550 Podręcznik - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik dla Rozpylacz farby Astro Pneumatic Tool 4550. Astro Pneumatic Tool 4550 3 stron. Air operated paint shaker
Drukuj stronę
MAINTENANCE INSTRUCTION:
LUBRICATION:
1.)
Oil paint shaker with 2 - 3 drops of air tool oil once every 3 weeks if there
is no moisture in air line or air supply. If moisture in air line or air
supply exists, use 2 - 3 drops or air tool oil, daily. DO NOT OVER OIL.
TIGHTNESS OF PARTS:
2.)
Regularly check whether all connection parts are fastened securely.
Follow this procedure daily before beginning work.
3.) STORAGE:
Avoid storing the tool in a location subject to high humidity. If the tool is
left unused, the residual moisture inside the tool can cause rust. Before
storing and after operation, oil the tool at the air inlet with spindle oil and
run it for a short period.
DISPOSAL:
4.)
Follow national legislation of waste disposal. Never drop into fire.
ORDERING SERVICE PART:
5.)
For further operational and handling information or for replacement of
parts and components, contact the sales agent from where you purchased
the tool, or the service division of our company. *When ordering parts and
components, give each part number, name and quantities.
OPERATION INSTRUCTION:
1.) Before operating shaker, clamp can securely and
use caution not to crush can.
2.) To start shaker: Open On/Off control valve.
3.) IMPORTANT: NOT FOR USE WITH AEROSOL CANS
4.) Recommended air pressure
SUGGESTED AIR LINE CONNECTION
4550
90 to 120 psi at inlet
AIR OPERATED PAINT SHAKER
1) The tool shall not be used in potentially explosive atmospheres.
2) Disconnect the air hose before changing or adjusting any inserted tools.
3) Before using tool, please confirm all couplings and plugs are
fixed securely. Air hose that is under pressure may lash out when
disconnected and could lead to serious injuries.
4) Prevent loose clothes, long hair or any other personal accessories from
coming close to moving parts to reduce the risk of being injured.
5) Excessive high air pressure, that exceeds the maximum pressure,
may cause injuries to user.
6) Exposure to strong vibration for extended time may cause harm to operator.
7) Slip/Trip/Fall is a major reason of serious injury or death.
Beware of excess hose left on the walking or work surface.
9) Wearing correct breathing protection will help avoid inhaling dust or
handling debris from work process that can be harmful to your health.
10) High sound level can cause permanent hearing loss.
Use hearing protection while operating tool.
11) Be aware of work surface dangers prior to beginning work.
It is recommended that shaker is installed a minimum of 2'-3' from
other objects that could lead to damage or injury if shaker comes in contact.
12) This power tool is not insulated. If contact is made with an
electric current, injury may occur.
13) Dust created by sanding, sawing, grinding, drilling and other related activities
may expose the user to dust and/or microscopic particles that may contain
chemicals known to the State of California to cause cancer, birth defects or
other reproductive harm.
14) Not for use with aerosol cans.
Users of this tool should review the chemical composition of the work
surface and any products used in conjunction with the operation of this tool
for any such chemicals prior to engaging in any activity that creates dust
and/or microscopic particles.
Users should obtain the Material Safety Data Sheets for all identified
chemicals, either from the manufacturer or their employer, and proceed to
study, understand, and follow all instructions and warnings for exposure
to such chemicals.
Some examples of these chemical are: lead from lead based paints;
crystalline silica from bricks, cement and other masonry products;
and arsenic and chromium from chemically treated lumber.
A listing of the chemicals can be obtained at www.oehha.ca.gov
under Proposition 65.
In order to reduce their exposure to such chemicals users should always:
- work in well-ventilated areas .
- wear appropriate safety equipment and clothes that are specifically
designed to filter out microscopic particles