Astro Pneumatic Tool 3026 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Sander Astro Pneumatic Tool 3026. Astro Pneumatic Tool 3026 4 stron. 12v cordless variable speed palm polisher w/ 2 batteries

Drukuj stronę

Model:

3026

DESCRIPTION

6" cordless polisher, DC 12V, 2.0Ah, orbital design, direct drive.

Ideal for autos, SUVs, boats, airplanes and other coated finishes.

OPERATING INSTRUCTIONS

1. Place a clean Foam Pad securely onto the EVA Plate.

2. Prior to waxing/polishing a vehicle, make sure its surface has been thoroughly cleaned and is free of dust, dirt, oil,

grease, etc. And waxing should not be performed in direct sunlight or (obviously) rain.

3. Start with around 3-4 pea-sized dollops of liquid wax around the circumference of the wax pad. Do not apply

the wax directly to the surface of the vehicle. The amount of wax needed will vary according to the size of the

vehicle being waxed. NOTE: Avoid using too much wax.

4. Grip the Polisher firmly with both hands. Make sure the pad with wax on it is in contact with the vehicle's paint

BEFORE you turn the polisher on, or the centripetal force of the spinning polisher will fling product off the pad and

all over you and your workspace. Then turn the Power Switch to its "ON" position and control the pad speed with

the speed selector switch positions 1-6.

5. Begin applying wax to the vehicle. Apply the wax to all flat surfaces with broad, sweeping strokes in a 2' x 2' area of

paint at a time. Apply the wax evenly over the surface of the vehicle, and add additional wax as needed.

6. You'll need to turn the machine off when adding wax to the pad as well. Remove the Foam Pad. With the Foam

pad in your hand apply the wax to all hard to reach areas of the vehicle such as around lights, door handles, under

bumpers, etc.

7. Allow sufficient time for the wax to dry on the vehicle, the drying time is heavily dependent on ambient temp,

humidity or wax manufacture recommendations.

PARTS BREAKDOWN

Index Part No.

Call 1.800.221.9705 for questions concerning performance of the product

or other inquiries.

Parts List

Switch Button

12V Lithium Battery

Speed Control: 1-6 Level

3026-04

6" backing pad

3026-05

Battery Charger

3026-06

Battery

3026-07

6" Foam Pad

Product Type:

12V CORDLESS VARIABLE SPEED

PALM POLISHER W/ 2 BATTERIES

Description

Page 4

Qty

912