Astro-Gadget DobsonDream Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Astro-Gadget DobsonDream. Astro-Gadget DobsonDream 8 stron. Push-to dsc controller

Drukuj stronę

(alignment) on two stars. To do this, aim the telescope at a previously known, bright star.

Select the same star by clicking on the planetarium screen, and click the Align button. Do the

same with another star in advance. If, during the transfer of the telescope to another star, it is

detected that the crosshairs on one or both axes are moving in the opposite direction, change

the sign in the corresponding field of the number of steps / impulses of the encoders in

position 7, 8 in photo 7 and perform the procedure of binding the telescope to two stars

again. If everything went well, then smoothly moving the telescope tube you can start to

make a fascinating tour through the infinite expanses of the universe.

Changing the settings of the WiFi network DobsonDream can be done via the WEB interface

at the initial IP address 192.168.0.1.

3. Work with PC

If DobsonDream has a Bluetooth interface, then first you need to establish a connection

between the PC and DobsonDream via Bluetooth. To do this, on the Windows Control Panel,

click Devices and Printers \ Add a Device. The PC must detect Bluetooth. Then select the

access by password and enter "1234". The PC must create a Bluetooth connection and the

"Device COM port COMxx" should appear in the device manager. If DobsonDream has a

WiFi interface, then you need to connect to the WiFi access point "DobsonDream". By

default, a network with open access. Next, you need to create a TCP-COM bridge. To do

this, use the free utility USR-VCOM (http://www.usriot.com/usr-vcom-virtual-serial-

software/), registering the parameters as on photo 8.

Photo 8

A new COM port will appear in the device manager, which you will have to select in the

planetarium program when you connect to DobsonDream.