Canon CN20x50 Series Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Obiektyw kamery Canon CN20x50 Series. Canon CN20x50 Series 41 stron. Information display
Również dla Canon CN20x50 Series: Instrukcja obsługi (33 strony), Skrócona instrukcja obsługi (14 strony)

Drukuj stronę

2 HOW TO MOUNT

2-1. MOUNT THE LENS ON THE CAMERA

For PL mount, read the following instructions before mounting the lens.

1. The PL mount supports Cooke's /i Technology, so make sure that the camera is set to "/i".

2. Do not mount the lens if the camera is set to a mount communication mode other than "/i". Doing so could

result in malfunction.

Before mounting the lens on the camera, make sure that the power of camera and the power of supply

equipment are turned off.

Lens Support Fixing Screws

Attachment

Holder

Lens Support

Screw supplied with the

Lens Support

Rods ( φ 19)

Attach the lens to the camera tightly so that both

mounting surfaces are in complete contact.

NOTE

The mounting method differs depending

on the lens mounts. Refer to the operation

manual for the respective camera for the

detailed information.

If the rod interferes with the lens body or

drive unit when mounting the lens, remove

the rod and then mount the lens.

Secure the lens holder on the lens support using the

screw supplied with the lens support.

Secure the attachment holder to a different lens

support from the lens support mentioned in step

and fit the attachment holder into the attachment

holder contact plate ( ㉑ in figure on page 2) at the

rear of the lens.

Fix the lens support to the rods using lens support

fixing screws.

2 HOW TO MOUNT