ASTRO-PHYSICS GTO Series Instrukcja obsługi technicznej - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi technicznej dla Keypad ASTRO-PHYSICS GTO Series. ASTRO-PHYSICS GTO Series 17 stron.

if all else fails

if you are unable to resolve the reset problem with any of the above procedures, please call astro-Physics. We will ask

about the results of these procedures before issuing a return authorization (Ra) number. Please be prepared to discuss

your results.

the mount will continue to track even if the keypad has reset. if you are in the middle of an exposure, you can continue as

if nothing has happened. it will not affect the performance of the mount in any way.

Keypad version 3.0 or later (and c chip or above in the gto control box). if the keypad resets, the chip in the gto control

box will remember the date, time and location set at the beginning of your session and the R.a. and dec. coordinates of

where your telescope is pointing. the mount will track as if nothing has happened. if the keypad screen has changed to

another menu, simply return to the screen that you were in to continue your session. Keypad resets are annoying with

these keypad versions, but do not cause a major interruption of your session.

Keypad version 2.6 or earlier. if the keypad resets, the mount will continue to track normally. however, the keypad will

return to the normal startup sequence, which will require that you chose your location and follow one of the calibration

routines. Keypad resets are very annoying and disruptive with these early keypad and gto control chip versions. We

strongly suggest that you upgrade to the newer versions to gain the advantage of many new features. Please refer to the

technical support section of our website for further information regarding upgrades.

11-28-16