AstroAI DT201D Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe AstroAI DT201D. AstroAI DT201D 19 stron. Auto range digital clamp meter

1、Transformer Jaws

Pick up the AC Current flowing through the conductor.

2、Trigger

Press the level to open the transformer jaws when the finger

press on the level is released the jaws will close again.

3 、 Hz/DUTY BUTTON

Push this button to select Hz or DUTY CYCLE

measurement, at Hz positing. at AC curent position,can

Measure frequency .

4、RANGE BUTTON

AC/DC voltage, AC current and Resistance measuring

ranges can be selected manually or automatically by

pushing the range control button. Push this button as

follows to choose range control mode and needed ranges.

5、Display

3 5/6 digit LCD, with a max. reading of 5999

6、

High input for all except voltage , measurement will accept

banana plugs.

7、COM Input Jack

Low input for all voltage, resistance, and continuity

measurement will accept banana plugs.

8、

resistance,continuty,capacitance,diode , Push selcet button

Input Connect

RANGE

- 6 -

etc