Canon EF-S18-135mm f/3.5-5.6 IS STM Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Obiektyw kamery Canon EF-S18-135mm f/3.5-5.6 IS STM. Canon EF-S18-135mm f/3.5-5.6 IS STM 15 stron. Efs lens, image stabilizer
Również dla Canon EF-S18-135mm f/3.5-5.6 IS STM: Instrukcja (14 strony), Instrukcja obsługi (11 strony), Podręcznik użytkownika (18 strony), Podręcznik (11 strony)
6
Image Stabilizer
You can use the image stabilizer in AF or MF
mode.
This function provides optimal image stabilization
depending on shooting conditions (such as
shooting still subjects and following shots).
1
Set the STABILIZER switch to ON.
If you are not going to use the image stabilizer
●
●
function, set the switch to OFF.
2
When you press the shutter button halfway,
the Image Stabilizer will start operating.
Make sure the image in the viewfinder is stable,
●
●
then press the shutter button the rest of the way
down to take the picture.
The Image Stabilizer cannot compensate for a
●
●
blurred shot caused by a subject that moved.
The Image Stabilizer may not be fully effective
●
●
if you shoot from a violently shaking vehicle or
other transportation.
The Image Stabilizer consumes more power
●
●
than normal shooting, so fewer shots can be
taken if you use the function.
When shooting a still subject, it compensates for
●
●
camera shake in all directions.
It compensates for vertical camera shake during
●
●
following shots in a horizontal direction, and
compensates for horizontal camera shake during
following shots in a vertical direction.
When you use a tripod, the Image Stabilizer
●
●
should be turned off to save battery power.
Even with a monopod, the Image Stabilizer will
● ●
be as effective as during hand-held shooting.
However, depending on the shooting environment,
the Image Stabilizer effect may be less effective.
The image stabilizer function also operates when the
● ●
lens is used with an Extension Tube EF12 II or EF25 II.
If you set the camera's Custom Function to
●
●
change the assigned button to operate the AF,
the Image Stabilizer will operate when you press
the newly assigned AF button.
ENG-9