Dorel Pacific Cycle KID Trax Semi-Truck & Trailer KT1565WM Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmotoryzowany samochód zabawka Dorel Pacific Cycle KID Trax Semi-Truck & Trailer KT1565WM. Dorel Pacific Cycle KID Trax Semi-Truck & Trailer KT1565WM 9 stron.

Drukuj stronę
Assembly:
Attach the steering wheel and trailer walls
Follow the assembly steps in the order
listed below.
❶ Attach the steering wheel
• Connect the wire connectors
• Remove the bolt and nut from the
steering wheel
• Place the steering wheel over the
steering column
• Align the holes in the steering wheel
with the holes in the steering column
• Insert the bolt completely through
the steering wheel base and fasten
with the nut
❷ Attach the trailer walls
• Turn the trailer base over so it is now
right side up. Flip the trailer kick stand
down while assembling the walls
• Insert the tabs of the front and back
walls down into the trailer base slots
• Insert the tabs of the side walls down
into the trailer base slots. The tabs on
the front and back walls will lock into
the slots on the side walls
❸ Lock the trailer walls
• Rotate the 6 wall locks a quarter turn
until they are locked into place.
❹ Connect the trailer to the cab.
• Position the trailer hitch over the
bracket
• Pull the hitch lever back and lower the
trailer hitch into the bracket
• Release the hitch lever
❶
Remove the nut and
Tip
bolt before you attach
the steering wheel.
10
❷
Tip
❷
❹
❺
❶
❹
Flip kick-stand down
while assembling the
walls.
❸
❸
Wall lock
❷
❶
11
❸