Colasit CDVA 630 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Colasit CDVA 630. Colasit CDVA 630 16 stron. Roof fan in plastic

Drukuj stronę

1.8

General risk matrix

Operation

The safety regulations prevailing at the operator's location are mandatory and must be

observed at all times. Before making an intervention, the process must be stopped, i.e.

all mechanical movement must be stopped and it must be ensured that no automatic

motion can occur.

Missing safety devices

If the fan is equipped with safety devices, they may neither be modified nor removed.

Further safety devices of suitable design must be fitted by the operator and are subject

to his control.

Disregard of safety precautions

Please implement all safety measures so that the fan, together with its associated

equipment, can operate properly and any danger to persons, materials and products can

be excluded.

Putting the fan out of operation

In the case of damage to or failure of safety devices, the fan must be stopped and put

out of operation. It may only be put into operation again when the safety devices are fully

functional again.

Electricity

When any work is carried out on the fan, the electric motor must be deenergised and

secured to prevent it from switching on. The main power switch must be secured against

operation by third parties using a lockable device (e.g. padlock) by the persons working

on the fan. Full disconnection of the motor is only permissible in case of complete

removal!

The safety regulations for work on electrical equipment prevailing at the place of

operation must be observed at all times and be available for reference at the place of

operation.

Electrostatic charge

Media flowing through the plastic components may cause the buildup of electrostatic

charge. These are harmless to persons who do not react to electrical impulses in the

body

Unsuitable materials

Through the use of inappropriate materials, the fan and/or parts may be damaged or

become non-functional. Please always use original spare parts and contact the

manufacturer in any case of doubt.

Dangerous media

Depending on the mode of operation, fan parts may come in contact with dangerous

media.

Work on the fan or carrying out maintenance work is not allowed during operation.

Before carrying out any work, any dangerous media must be removed from the system

and, when required, must be neutralized and secured in such a way that an inflow of

dangerous media is prevented.

Page 6

TD-000 812-E

Edition 02/2023, Subject to alteration

COLASIT AG

Plastics construction

CH-3700 Spiez

Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61