COLDBUSTER FLOORHEATING MCD5 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Termostat COLDBUSTER FLOORHEATING MCD5. COLDBUSTER FLOORHEATING MCD5 5 stron.

USE MANUAL MODE

Putting the thermostat in MANUAL MODE at your desired temperature, the

floor heating will stay on until you turn it off or set it to programming mode.

On the DEFAULT SCREEN (above Right), press on the MANUAL Button.

The MANUAL screen (right) will then come up. Use the up or

down arrows to set your required temperature.

The temperature figure will go RED when the heating is on.

Press the

button to take it out of Manual mode & will return to prog

mode.

OTHER MODES THAT CAN BE OF USE:

These are:

COMFORT MODE

BOOST MODE

HOLIDAY MODE

These MODES are found by clicking on the OTHER button on the lower right corner of the screen.

COMFORT MODE: This is similar to manual mode except that it has a

time frame associated with it.

Press OTHER, then choose COMFORT. The screen will tell you, "You are

overriding the Auto schedule". Confirm by pressing the button. Then adjust

the temperature using the up or down arrows. Press the to confirm. You

can then set how many hours you would like it on by pressing the up or

down arrows. Press the to confirm.

After the set number of hours, the thermostat will return to programming mode.

BOOST MODE: This puts the heater on for 100% of the next hour.

Press OTHER, and then choose BOOST. The screen will tell you that the

thermostat will be activated for 1 hour. Confirm by pressing the .

HOLIDAY MODE: This prevents your floor area from freezing while

you are away on holiday and switches the floor heating back on when you

return. Click on the OTHER button on the lower right corner of the screen.

Scroll down with the down arrow & choose HOLIDAY. Press to the right of

the OFF button & then confirm with the  button. The screen then advises

you that it will keep your floor above freezing during your planned holiday.

Press the  arrow. Set your leave date, then press the  button. Set your

Return date, then press the  button. It will then say the Holiday mode is

activated for 1 second & then revert to the HOLIDAY MODE screen.

As with the other modes, should you wish to get out of that particular mode, press the  button.