Canon EOS-1D Mark II Digial Wskazówki i techniki - Strona 15

Przeglądaj online lub pobierz pdf Wskazówki i techniki dla Oprogramowanie Canon EOS-1D Mark II Digial. Canon EOS-1D Mark II Digial 35 stron. Firmware update procedures
Również dla Canon EOS-1D Mark II Digial: Broszura i specyfikacje (20 strony), Instrukcja obsługi (28 strony), Instrukcja obsługi (41 strony), Instrukcja oprogramowania (2 strony), Instrukcja oprogramowania (2 strony), Instrukcja obsługi (19 strony), Instrukcja obsługi produktu (39 strony), Podręcznik kieszonkowy (2 strony), Podręcznik użytkownika (2 strony), Specyfikacje (2 strony), Podręcznik (29 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Aktualizacja instrukcji (8 strony)

photography when another subject or obstacle temporarily blocks the original subject.

The default setting is 0.5 seconds, but with this Custom Function it can be tweaked

faster or slower according to the photographer's personal preference.

• C.Fn 20-0 is the camera's standard setting. It programs the AF to remain at the most

recently focused distance for up to 0.5 seconds while an obstacle is blocking the

original subject.

• C.Fn 20-1 ("Slow") programs the AF to remain at the most recently focused distance

for up to 1 second while an obstacle is blocking the original subject.

• C.Fn 20-2 ("Moderately Slow") programs the AF remain at the most recently focused

distance for up to 0.75 seconds while an obstacle is blocking the original subject.

• C.Fn 20-3 ("Moderately Fast") programs the AF to refocus on a new subject

approximately 0.25 seconds after the original subject is no longer being tracked.

• C.Fn 20-4 ("Fast") programs the AF to refocus on a new subject approximately 0.125

seconds after the original subject is no longer being tracked.

In C.Fn 20-3 and 20-4, the lens focusing motor may seem more "jittery" than usual as it

constantly refocuses the lens. This is normal.

Custom Function 21 first appeared with the EOS-1D Mark II. It is the same as Personal

Function 13 from the EOS-1D and EOS-1Ds. The purpose of this setting is to control the

camera's shutter release timing during continuous bursts in AI Servo AF. In all cases,

release timing for the first shot is controlled by the photographer, and the camera will

fire whether or not the subject is in focus. This is called "Release Priority," as opposed

to "Focus Priority," in which the camera does not fire until the AF system has confirmed

that the subject is in focus.

• C.Fn 21-0: Focus Priority within a prescribed time limit

subsequent shots in a continuous burst with AI Servo AF.

* The shutter will release at the framing rate set by the photographer, as long as lens drive can be completed

within a prescribed time limit. The shutter releases at the end of the prescribed time limit, even if focus has

not been achieved.

• C.Fn 21-1: Release Priority for the second and subsequent shots in a continuous burst

with AI Servo AF.

Some photographers prefer C.Fn 21-1 because it ensures that the camera will fire at a

consistent framing rate, even though it means that the subject may not be accurately

focused. However, this is clearly a "use at your own risk" scenario, because there is no

way to be sure that your photos will be sharp.

Personal Function 14 disables focus detection ("hunting") by the lens drive. This can

save time in low light or low contrast situations, especially when working with a USM

lens equipped with a distance scale. Such lenses can be focused manually even when

set to their AF mode.

I. CAMERA FEATURES AND OPERATION

for the second and