Akyga AK-CH-14 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zasilanie Akyga AK-CH-14. Akyga AK-CH-14 4 stron.

AK-CH-14 - user manual

The II protection class device. It provides protection against electric shock against direct and

indirect contact, and thanks to the additional isolation it is not necessary to connect the device

case with the protective earth conductor.

The device is intended only for domestic use, indoors.

Safety Precautions

WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power

supply, do not place it in restricted ventilation area. Also, do not allow the working power supply to touch

soft surface such as pillows, blankets or clothing. The power supply meets the limits on the surface

temperatures available to the user, as defined in the International Standard for Safety of Information

Technology Equipment (IEC 60950).

smartphone or other device

Connecting

supply, can cause battery failure or even damage (burn) of power supply.

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet . Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the computer, abstain from touching electrical outlets, wires and

electonic circuits. The user's contact with electronic components should be kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

Keep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

The product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

If the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

Take account of the user manual for other devices connected to the USB power adapter.

Product and power cord should not be touched with moist or wet hands under no

circumstances.

Short-circuiting the current connection is prohibited.

Connection of USB power adapter to electricity is made by plugging the adapter to

corresponding socket in your vehicle.

Before connecting the adapter to the socket, make sure that the voltage specified on the power

supply matches voltage supplied to the cigarette lighter socket.

Adapter should be disconnect from power socket if it is not in use for a long time.

In case of any doubts regarding operation, safety or connection of the product, please contact

the manufacturer or a qualified specialist for this purpose.

All maintenance, adjustment and repair work on the product may only be carried out by a

qualified person in a specialist facility.

whose demanded power is greather than power of the power

p. 2