Cole Parmer 1200 Series Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przyrządy pomiarowe Cole Parmer 1200 Series. Cole Parmer 1200 Series 18 stron.

Unpacking Instructions

Carefully unpack the contents and check the materials against the following packing list

to ensure that you have received everything in good condition.

Packing List

Refer to Table-2 for the Packing List.

Table-2

Packing List

Description

Spectrophotometer

Dust Cover

10 mm Optical Square Cuvette

Test Tubes (1/2 inch)

Cuvette Cap

V-type Tube Holder (8 to 25 mm)

10 mm Single Cuvette Holder

Black Block

4-position Cuvette Holder

Power Cord

User Manual

1. Place the instrument in a suitable location away from direct sunlight. In order to have

the best performance from your instrument, keep it as far as possible from any strong

magnetic or electrical fields or any electrical device that may generate high-frequency

fields. Set the unit up in an area that is free of dust, corrosive gases and strong

vibrations.

2. Remove any obstructions or materials that could hinder the flow of air under and

around the instrument.

3. Select either 230V or 125V on the Voltage Selector Switch on the bottom of the

1200/1201 shown in Figure-2, to match your local main voltage supply.

4. Turn on your Cole Parmer 1200/1201 and allow it to warm up for 15 minutes before

taking any readings.

Figure-2

Bottom of Cole Parmer 1200/1201

Quantity

Model 1200

Box of 12

1 (installed)

Voltage Selector Switch

Bottom of Model 1200/1201

Model 1201

1 (installed)