Asus 90MB13H0-M0EAYC Podręcznik - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik dla Płyta główna Asus 90MB13H0-M0EAYC. Asus 90MB13H0-M0EAYC 28 stron.

1.4

System memory

This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory Module

(DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets:

•

Recommended memory configurations

DIMM_B1*

1-8

DIMM_B1*

DIMM_A1*

You may install varying memory sizes in Channel A and Channel B. The system

maps the total size of the lower-sized channel for the dual-channel configuration. Any

excess memory from the higher-sized channel is then mapped for single-channel

operation.

Always install DIMMs with the same CAS latency. For optimal compatibility, we

recommend that you install memory modules of the same version or date code (D/C)

from the same vendor. Check with the retailer to get the correct memory modules.

For 10

Gen Intel

processors, only Core™ i9/i7 CPUs support 2933/2800/2666/2400/

2133 natively, others will run at the maximum transfer rate of DDR4 2666MHz.

The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value.

For system stability, use a more efficient memory cooling system to support a full

memory load (2 DIMMs).

Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).

DIMM_A1*

Channel

Channel A

DIMM_A1*

Channel B

DIMM_B1*

DIMM_A1*

Chapter 1: Product introduction

Sockets