Asus 90MB14Z0-M0EAY0 Podręcznik - Strona 23

Przeglądaj online lub pobierz pdf Podręcznik dla Płyta główna Asus 90MB14Z0-M0EAY0. Asus 90MB14Z0-M0EAY0 30 stron.

2.5

RAID configurations

The motherboard comes with the RaidXpert2 Configuration Utility that supports RAID 0,

RAID 1 and RAID 10 configuration.

For more information on configuring your RAID sets, please

refer to the RAID Configuration Guide which you can find at

https://www.asus.com/support, or by scanning the QR code.

RAID definitions

RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in

parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a

sustained data transfer rate, double that of a single disk alone, thus improving data access

and storage. Use of two new identical hard disk drives is required for this setup.

RAID 1 (Data mirroring) copies and maintains an identical image of data from one drive to

a second drive. If one drive fails, the disk array management software directs all applications

to the surviving drive as it contains a complete copy of the data in the other drive. This RAID

configuration provides data protection and increases fault tolerance to the entire system. Use

two new drives or use an existing drive and a new drive for this setup. The new drive must be

of the same size or larger than the existing drive.

RAID 10 is data striping and data mirroring combined without parity (redundancy data) having

to be calculated and written. With the RAID 10 configuration you get all the benefits of both

RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive

and three new drives for this setup.

ASUS PRIME A520M-A

2-5