Doremi Labs HDVI-20d Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów Doremi Labs HDVI-20d. Doremi Labs HDVI-20d 16 stron.
Drukuj stronę6 OSD and Remote Control functions
By default, the HDVI-20d infrared (IR) controls are unlocked. To lock, press "MUTING" for 4
seconds. The same process can be used to unlock the IR controls. The lock state of the HDVI-20d
is saved even if the unit is turned off. Please make sure the included IR remote is in TV mode and
not in Cable mode by pressing the TV button.
To access the OSD menu, press "RECALL". The OSD will display six icons:
From left to right, these Icons represent:
Input Source Selection | Picture Settings | OSD Settings | Input Settings | DVI Output Settings |
Miscellaneous
To navigate through the menus, use the 2,8,4,6 button on your remote as Up, Down, Left, Right.
The table below explains all remote functions in both cases: On-screen display (OSD) ON or OFF.
HDVI-20d Remote Control
OSD OFF
Input Select
Toggle IR lock
Restore I/O settings
Force Flash Mode
Menu Access
Force Output Mode
OSD ON
Key
CH +
Press and hold MUTING for
4 seconds
POWER: See paragraph 6.1 Restore I/O settings
Press and hold TV/VIDEO
for 4 seconds
RECALL
TV/Video + 0-9
TV/Video + 0
TV/Video + 1
TV/Video + 2
TV/Video + 3
TV/Video + 4
TV/Video + 5
TV/Video + 6
TV/Video + 7
TV/Video + 8
TV/Video + 9
Function
Switch between HD-SDI, SDI, DVI-D,
DVI-A
Lock/Unlock IR.
Displays a red screen to indicate that the
unit is in flash mode and ready to be
upgraded
Access the menu system
Force the DVI-D output to:
Auto Mode
1024x768
1280x720
1280x768
1280x1024
1366x768
1400x1050
1920x1080
1920x1200
1080i