DOREMIDI MCV-10 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów DOREMIDI MCV-10. DOREMIDI MCV-10 10 stron. Midi to cv box

(Note: CV/Gate related information: https://en.wikipedia.org/wiki/CV/gate)

Connection

Steps for usage

Powering/connecting the computer:

Supply power to the product through "USB" or connect to a computer, and the indicator light is always on

after power is supplied.

Connect the MIDI DIN device:

Through the MIDI TRS port of "MIDI IN", connect the TRS to MIDI cable, and then connect to the MIDI

OUT of the MIDI device.

Connect the Gate:

Use a mono 3.5mm TRS cable and connect it to the gate input interface of the synthesizer through

"GATE". The gate defaults to 0/5V output, the gate is closed to 0V, and the gate is open to 5V.

Connect the CV:

Use a mono 3.5mm TRS cable to connect to the synth's CV input via "CV".

Connect the AUX:

AUX is the auxiliary output. Use a mono 3.5mm TRS cable to connect to the auxiliary input interface of

the synthesizer through "AUX".

Name

MIDI channel

GATE

AUX

Or output MIDI clock, configurable frequency division (2~24)/multiplier

(2/4/8/16).

MCV-10 factory default parameter table

Responds to all MIDI channels by default.

0/5V output, Gate closed is 0V, open is 5V

Re-Trigger: None

Trigger Delay: None

Gate Toggle: None

CV Type: V/Oct, voltage range 0~8.833V, corresponding to Note 21~127

(A0~G9)

Note Priority: Respond to latest Note

Reference Note: 0V corresponds to Note 21 (A0)

AUX Type: MIDI volume, voltage range 0~5V, corresponding to MIDI

volume 0~127

Description