daewon DIB-N830 Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Armatura łazienkowa daewon DIB-N830. daewon DIB-N830 20 stron.

Drukuj stronę

Trial Operation

1. Turn on the water supply

Make sure the flush tank is filled up with water.

2. Check all connections for leaks, including T-valve and hose connections

In case of leakage, check the tightening of the nut and whether the rubber washer

is missing or twisted, and Teflon tape may be required depending on the installation

environment.

3. Plug in

Do not touch the plug with wet hands.

4. Check the initial operation

The night light blinks while the nozzle extracts and retracts.

Operations

Occupied seat sensor (getting started)

Sit on the seat to ensure skin contact on the seat

sensor.

Clothes or other materials except for skin contact on

the sensor may interrupt the bidet seat operation.

Once the contact is made the water pressure

indicator lights will turn on.

Leaving the seat during use will stop the operation.

Stop

Stops all wash and dry functions currently operating

(Side arm/Remote control)

Gently touch for a second any parts of the dotted

area to stop the wash cycle. (Auxiliary panel)

Rear wash / Front wash / Turbo wash / Oscillation

Select once to initiate a rear/front/turbo wash.

The nozzle will be self-cleaned before/after wash

operation. (Turbo wash is not available with the

auxiliary panel.)

Select once again to initiate nozzle oscillation. To

stop the oscillation, choose again.

The oscillation at Turbo wash is not available for

safety.

Do not use a Turbo wash excessively and consult

with a doctor first if you have any anal disease or

you are sensitive.

For water temperature when using in a cold

environment, refer to the cautions in this manual.

Swipe finger toward the front to initiate a front wash.

Swipe finger toward the front again to initiate an

oscillation. (Auxiliary panel only)

Swipe finger toward the rear to initiate a rear wash.

Swipe finger toward the rear again to initiate an

oscillation. To cancel the oscillation, swipe the same

direction again. (Auxiliary panel only)

Side arm/Remote control

Auxiliary panel

Side arm/Remote control

Auxiliary panel

Oscillation