Asus E35M1-I Podręcznik użytkownika - Strona 23

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Płyta główna Asus E35M1-I. Asus E35M1-I 50 stron. User manual

System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

E35M1-I System panel connector

•

System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED

cable to this connector. The system power LED lights up when you turn on the system

power, and blinks when the system is in sleep mode.

•

Hard disk drive activity LED (2-pin +HDLED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable

to this connector. The IDE LED lights up or flashes when data is read from or written to

the HDD.

•

Power/Soft-off button (2-pin PWRBTN)

This 2-pin connector is for the system power button.

•

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without

turning off the system power.

Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect

one end of the chassis intrusion sensor or switch cable to this connector. The chassis

intrusion sensor or switch sends a high-level signal to this connector when a chassis

component is removed or replaced. The signal is then generated as a chassis intrusion

event.

By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper

cap. Remove the jumper caps only when you intend to use the chassis intrusion

detection feature.

E35M1-I Chassis intrusion connector

Chapter 1: Product introduction

F_PANEL

Reset

GND

Ground

PWR

HD_LED-

PLED-

HD_LED+

PLED+

PIN 1

CHASSIS

GND

Chassis Signal

+5VSB_MB

1-13