Canon WebView Livescope MV Ver. 2.1 LE Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprogramowanie Canon WebView Livescope MV Ver. 2.1 LE. Canon WebView Livescope MV Ver. 2.1 LE 24 stron. Versatile monitoring software

Drukuj stronę

Displaying Full Screens

Images in a selected viewer can be displayed on the entire screen. Click on the viewer to select it,

then click the Full Screen button on the toolbar.

When you click anywhere on the full screen display, the camera's pan and tilt are controlled so that

that position becomes the center of the image. Press ESC to return to the original screen display.

Viewing Connection Information

When you right click on the full-screen display, a pop-up

menu appears. Choose Return to Normal to restore the

normal display.

If you choose Camera Control Panel, the Camera Control

Panel appears in a pop-up window which you can use to

control the camera.

This command displays information about the connection

to the camera server. To view this information, click the

Network Information button on the toolbar.

Frame rate

Shows the frame rate for the viewer.

Image Size

Shows the size of the image being displayed.

Video capture size

Shows the size of the video being captured by the

camera server.

Compression type

Shows the image compression type being used.

Video [WV-TCP]

Shows the IP address and Port No. of the camera

server if WV-TCP is being used for the video

transmission protocol.

Camera control [WV-TCP]

Shows the IP address and Port No. of the camera

server if WV-TCP is being used for the camera control

protocol.

Video/Camera control [WV-HTTP]

Shows the IP address and Port No. of the camera

server if WV-HTTP is being used for the protocol.

HTTP proxy

Shows whether a HTTP proxy is being used (ON) or not

used (OFF).

Local time

Shows the current time at the camera server.

Operating from the Toolbar