Canon LV 5210 - SVGA LCD Projector Specyfikacja - Strona 23
Przeglądaj online lub pobierz pdf Specyfikacja dla Projektor Canon LV 5210 - SVGA LCD Projector. Canon LV 5210 - SVGA LCD Projector 47 stron. Expand serial command functional specification
Również dla Canon LV 5210 - SVGA LCD Projector: Specyfikacja (22 strony)
Drukuj stronę
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable
Response
Unacceptable
8.7 Input Control COMMAND
8.7.1
CF_INPUT COMMAND
COMMAND
"CF_INPUT_%1" [CR]
"COMPUTER1"........ Select COMPUTER 1 input
%1
"COMPUTER2"........ COMPUTER 2 input
"VIDEO"........................ VIDEO input
Select Input.(Only valid when it is in the usual Power ON status.)
The Command works as the same as the remote controls's unit "INPUT"
button.
Details
Note1:)
Note2:)The selection of Input-1 is not COMPUTER-1 but Memory card/
Wireless/Network when Option box is installed to Input-1 (COMPUTER1).
Acceptable
Response
Unacceptable
8.7.2
CF_SOURCECOMMAND
COMMAND
"CF_SOURCE_%1" [CR]
%1
Select current input source.
(Only valid when it is in the usual Power ON status.)
When selected Input and specified %1 are not matched, the projector
Details
Note) When the option, MCI BOX is installed to Input-1 (COMPUTER1),
selection for source is invalid.
Acceptable
Response
Unacceptable
"000" [CR]
"101" [CR] ----Input-VIDEO
If
trying
to
Input-2(COMPUTER)to MONITOR Out, the projector returns "101".
"000" [CR]
"%%%" [CR]
"DIGITAL"............Select DVI input
Input=1
"ANALOG"............ .Select ANALOG input 0
"HDCP"....................Select DVI HDCP input
"ANALOG"............Select RGB
Input=2
"YPBPR"................Select Component VIDEO input
"SCART"................ Select Scart input
"AUTO"..................Select VIDEO Auto MODE
Input=3
"VIDEO"................ Select Composite VIDEO input
"S-VIDEO"............ Select S-VIDEO input
returns"101" and does not execute the command.
"000" [CR]
"%%%" [CR]
select
Input-2
TERMINAL
error code "101"
when
setting
Page
23