Canon LV-5200 Instrukcja obsługi - Strona 30

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Canon LV-5200. Canon LV-5200 48 stron. Canon lv-5200: user guide
Również dla Canon LV-5200: Broszura i specyfikacje (2 strony)

Drukuj stronę
Canon LV-5200 Instrukcja obsługi
COMPUTER INPUT
3
Store
To store the manual image level, move the red frame pointer to
the Store icon and press the SET button. The message "OK?"
will appear. Select [Yes] to store manual adjustment.
To set this manual adjustment, select Custom by pressing the
IMAGE button or through the IMAGE SELECT Menu (refer to P28).
Other icons operate as follows.
Reset
Reset all adjustments to the previous figure.
Quit
Closes the IMAGE Menu.
This projector has the picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT button(s) to move the
red frame pointer to the SCREEN Menu icon.
2
Press the POINT DOWN button and move the red frame pointer
to the function that you want to select and then press the SET
button.
Normal
Provides the image to fit the screen size.
True
Provides the image in its original size. When the original image size
is larger than the screen size (800 x 600), this projector enters
"Digital zoom +" mode automatically.
Wide
Provides the image to fit a wide video aspect ratio (16 : 9) by
expanding the image width uniformly. This function can be used for
providing a squeezed video signal at 16 : 9.
Digital zoom +
When Digital zoom + is selected, the ON-SCREEN MENU
disappears and the message "D. Zoom +" is displayed. Press the
SET button to expand the image size. And press the POINT
UP/DOWN/LEFT/RIGHT button(s) to pan the image. The Panning
function can work only when the image is larger than the screen size.
A projected image can also be expanded by pressing the D.ZOOM L
button on the Remote Control Unit.
Digital zoom –
When Digital zoom – is selected, the ON-SCREEN MENU
disappears and the message "D. Zoom –" is displayed. Press the
SET button to compress the image size.
A projected image can also be compressed by pressing the D.ZOOM
M button on the Remote Control Unit.
To cancel Digital zoom +/– mode, press any button except D.ZOOM
L/M, SET, POINT and LASER buttons.
30

PICTURE SCREEN ADJUSTMENT

"OK?" message
Move the pointer to
[Yes] and then press
the SET button.
SCREEN MENU
Move the pointer to the function
and press the SET button.
NOTE
G This SCREEN Menu cannot be operated when
"1035i (HDTV)" or "1080i (HDTV)" is selected on
the PC SYSTEM Menu (P23).
G Wide cannot be selected when "720p (HDTV)" is
selected on the PC SYSTEM Menu (P23).
G True and Digital zoom +/– cannot be selected
when "RGB" is selected on the PC SYSTEM Menu
(P23).
G This projector cannot display any resolution higher
than 1024 x 768. If your computer's screen
resolution is higher than 1024 x 768, lower the
resolution before connecting the projector.
G The image data in other than SVGA (800 x 600) is
modified to fit the screen size.
G The Panning function may not operate properly if
the computer system set on the PC ADJUST Menu
is used.
SCREEN Menu icon