Canon LV-5210 Specyfikacja - Strona 9

Przeglądaj online lub pobierz pdf Specyfikacja dla Projektor Canon LV-5210. Canon LV-5210 47 stron. Mounting hanger for low ceilings
Również dla Canon LV-5210: Specyfikacja (22 strony), Broszura i specyfikacje (2 strony), (Japoński) Instrukcja montażu i instalacji (8 strony)

Drukuj stronę

EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210

Functional Execution Command Table

5.1 Image Command Table

Execute Command

CF_BRIGHT_%1 [CR]

CF_CONT_%1 [CR]

CF_COLOR_%1 [CR]

CF_TINT_%1 [CR]

CF_SHARP_%1 [CR]

CF_GAMMA_%1 [CR]

CF_WBAL-R_%1 [CR]

CF_WBAL-G_%1 [CR]

CF_WBAL-B_%1 [CR]

CF_COLTEMP_%1 [CR]

CF_PROGV_%1 [CR]

CF_IMAGE_%1 [CR]

CF_IMAGEADJ_%1 [CR]

5.2 PC Control Command Table

Execute Command

CF_FSYNC_%1 [CR]

CF_TDOTS_%1 [CR]

CF_CLAMP_%1 [CR]

CF_H-POS_%1 [CR]

CF_V-POS_%1 [CR]

CF_DDOTS_%1 [CR]

CF_DLINE_%1 [CR]

CF_PCSTORE_%1 [CR]

CF_PCMODEFREE_%1 [CR]

5.3 VIDEO Control Command Table

Execute Command

CF_AVDDOTS_%1 [CR]

CF_AVDLINE_%1 [CR]

CF_AVHPOS_%1 [CR]

CF_AVVPOS_%1 [CR]

CF_AVSERV_%1 [CR]

5.4 Input Control Command Table

Execute Command

CF_INPUT_%1 [CR]

CF_SOURCE_%1 [CR]

CF_INPUT_%1_%2 [CR]

CF_SYSTEM_%1 [CR]

Set Brightness value

Set Contrast value

Set Color value

Set Tint value

Set Sharpness value

Set-GAMMA value

Set White Balance Red value

Set White Balance Green value

Set White Balance Blue value

Set Color Temp. value

Set or Cancel for Progressive

Set Image MODE.

Reset and store for Image Adjustment.

Set Fine Sync value.

Set Total Dots value.

Set Clamp value.

Set Horizontal Position value.

Set Vertical Position value.

Set Display Dots value.

Set Display Line value.

Store e current PC Adj. Status to MODE 1, 2, 3, 4, or 5.

Reset MODE1, 2, 3, 4, and 5.

Set AV Horizontal Resolution Value

Set AV Vertical Resolution Value

Set AV Horizontal Position Value.

Set AV Vertical Position Value.

Reset AV Horizontal /Vertical Resolution that are set in

such as CF_AVDDOTS/CF_AVDLINE to default

setting.

Select Input.

Select Input Sauce.

Select Input and Source.

Select System.

Item

Page