Canon LV-5220 - Multimedia Projector SVGA Specyfikacja funkcjonalna - Strona 23
Przeglądaj online lub pobierz pdf Specyfikacja funkcjonalna dla Projektor Canon LV-5220 - Multimedia Projector SVGA. Canon LV-5220 - Multimedia Projector SVGA 42 stron. Multimedia projectors
Również dla Canon LV-5220 - Multimedia Projector SVGA: Specyfikacja funkcjonalna (20 strony), Specyfikacje (6 strony)
Drukuj stronę
Expand Serial Command Functional Specification
8.8.6. CF_KYSTNMODE Command
Command
"CF_KYSTNMODE_%1" [CR]
"STR" ----------- Set Keystone store Mode to Store
%1
"RST" ----------- Set Keystone store Mode to Reset
Details
Set Keystone store Mode. (Only valid when it is in the usual Power On status)
Acceptable
Response
Unacceptable
8.9. Lamp Command
8.9.1. CF_LAMPH Command
Command
"CF_LAMPH_%1" [CR]
%1
"RST"
Reset total lamp running time. (Only valid when it is in the usual Power On
Details
status)
Acceptable
Response
Unacceptable
8.9.2. CF_LAMPMODE Command
Command
"CF_LAMPMODE_%1" [CR]
"NORMAL" ---------- Set Lamp Mode to Normal
%1
"ECO" ---------------- Set Lamp Mode to Silent
" A U T O " - - - - - - - - - - - - - Set Lamp Mode to Auto
Select Lamp Mode. (Only valid when it is in the usual Power On status)
Details
This setting status is stored in EEPROM, hold even if AC Power turning Off and
On.
Acceptable
Response
Unacceptable
8.10. Sound Command
8.10.1. CF_VOLUME Command
Command
"CF_VOLUME_%1" [CR]
"000 – 063" -------------- Directly set Volume value
%1
"UP" ----------------------- Volume setting value +1
"DN" ----------------------- Volume setting value -1
Control Volume setting value. (Only valid when it is in the usual Power On
status)
The same operation as a Remote Control's turning up/down the volume. Also, the
Details
Command directly sets the volume value.
When setting volume value like Remote Control Unit operation, Sound Mute On
will be canceled. The setting value will be stored in a Projector.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 22 of 41