Canon LV-7350 Instrukcja obsługi - Strona 24
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Canon LV-7350. Canon LV-7350 48 stron. Canon owner's manual multimedia projector lv-7355 lv-7350
Również dla Canon LV-7350: Broszura i specyfikacje (2 strony)
Drukuj stronęCOMPUTER INPUT
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your
computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adj.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to PC
ADJUST Menu icon.
2
Press POINT DOWN button to move a red frame pointer to
AUTO PC Adj. icon and then press SET button twice.
This Auto PC Adjustment can be also executed by pressing
AUTO PC ADJ. button on Remote Control Unit.
Store adjustment parameters.
Adjustment parameters from Auto PC Adjustment can be memorized
in this projector. Once parameters are memorized, setting can be
done just by selecting Mode in PC SYSTEM Menu (P22). Refer to
step 3 of MANUAL PC ADJUSTMENT section (P26).
NOTE
G Fine sync, Total dots and Picture Position of some computers
cannot be fully adjusted with this Auto PC Adjustment function.
When the image is not provided properly through this function,
manual adjustments are required. (Refer to page 25, 26.)
G Auto PC Adjustment function cannot be operated when the input
signal is digital, or "RGB," "720p (HDTV)," "1035i (HDTV)" or "1080i
(HDTV)" is selected on PC SYSTEM Menu (P22).
24
PC ADJUSTMENT
AUTO PC ADJUSTMENT
PC ADJUST MENU
Move a red frame pointer to AUTO PC Adj.
icon and press SET button.
PC ADJUST Menu icon