Canon LV-7555 Specyfikacje - Strona 9

Przeglądaj online lub pobierz pdf Specyfikacje dla Projektor Canon LV-7555. Canon LV-7555 24 stron. Svga & xga models
Również dla Canon LV-7555: Broszura i specyfikacje (2 strony)

Drukuj stronę

MR3P

Series Basic Serial Command Function Specification

‚ S .4

Necessary Condition for Operation

When the projector 's status in this below, functional execution commands and

state read commands are limited.

Also, state read commands are available in the below the status.

Projector Status

Standby Mode

Processing Countdown

Processing Cooling Down

Processing Cooling Down due to

abnormal temperature

Abnormal Temperature Status

Processing Mode Change

Processing Power Save• E Cooling Down

Processing Power Save

Processing cooling down after

turning off automatically due to a

lamp failure

Notice• j When the status is above, even if the projector receives other command in the above

status, the projector returns [ACK]• m CR• n .

4.5

POWER ON Command

Command

"C00" [CR]

Power ON

When already Power ON, no need to do.

Detail

When sending this command during processing Count Down, Count Down is

terminated.

Acceptable

Response

Unacceptable

AVAILABLE FUNCTIONAL EXECUTION

COMMANDS

C00• F POWER ON

• i Terminate Processing Countdown • j

C01: POWER OFF

C02: POWER OFF

(Terminate Processing Countdown)

C46: ZOOM-

C47: ZOOM+

C4A: FOCUS-

C4B: FOCUS+

C5D: LENS SHIFT +

C5E: LENS SHIFT-

Note) When executing ZOOM+/-, FOCUS+/-.

LENS SHIFT +/- during Countdown,

C3C/C3D that are Pointer UP/DOWN will

available.

control ZOOM/FOCUS/LENS SHIFT.

NONE

C00• F POWER ON

C01• F POWER OFF

Other commands: POWER ON

NONE (Even if the projector receives

commands, it does not execute it)

[ACK] [CR]

"• H " [CR]

Soft Engineer Division

C3C/C3D

commands

Page

9 / 24

can