Canon LV-7565 Specyfikacja - Strona 15

Przeglądaj online lub pobierz pdf Specyfikacja dla Projektor Canon LV-7565. Canon LV-7565 47 stron. Multimedia projectors
Również dla Canon LV-7565: Broszura i specyfikacje (6 strony), Broszura (6 strony), Specyfikacje (6 strony)

Drukuj stronę
Canon LV-7565 Specyfikacja
Expand Serial Command Specification
Power Saving - Cooling Down
Power Saving State
Note) during the above-mentioned state, when received other Commands, return the
error code that indicates the invalid Command.

8.4. Image Series Command

8.4.1. CF_BRIGHT Command

Command
"CF_BRIGHT_%1" [CR]
"000 ~ 063" -------------- Directly select the Brightness setting value
%1
"UP" ---------------------- -- Brightness setting value +1
"DN" ---------------------- Brightness setting value -1
Set the User control Brightness value.
The value set by their Command will not be saved to the Projector.
Details
Therefore, when All Off the Projector, the value will return to the original
setting. (For stand-by mode, this value stays)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable

8.4.2. CF_CONT Command

Command
"CF_CONT_%1" [CR]
"000 ~ 063" -------------- Directly select the Contrast setting value
%1
"UP" ----------------------- Contrast setting value +1
"DN" ------------------------ Contrast setting value -1
Set the User control Contrast value.
The value set by their Command will not be saved to the Projector.
Details
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable

8.4.3. CF_COLOR Command

Command
"CF_COLOR_%1" [CR]
"000 ~ 063" -------------- Directly select the Color setting value
%1
"UP" ----------------------- Color setting value +1
"DN" ------------------------ Color setting value -1
Set the User control Color value.
The value set by their Command will not be saved to the Projector.
Details
Therefore, when All Off the Projector, the value will return to the original
setting. (For Stand-by mode, this value stays.)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable
None
C00: Power On
C01: Power Off
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 14 of 46