Canon LV-CL20 Instrukcja montażu i instalacji - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja montażu i instalacji dla Projektor Canon LV-CL20. Canon LV-CL20 20 stron.

I Attach the drop-prevention wire to the projector

To prevent the projector from falling down, use

the included drop-prevention wire to connect

the projector and the projector attachment.

(2 locations)

Caution

Be sure to follow these instructions to keep the

projector from falling. Otherwise, the projector

may fall and cause injury.)

Installation to the adjusters

Adjuster

1. Lift up the adjuster of the projector, and then wind

the included drop-prevention wire around it as

shown in the illustration.

Wind around

two more times.

2. Wind the drop-prevention wire around the

adjuster two more times.

Screws A (included) ... 2

3. Attach the drop-prevention wire to the projector

attachment with the two included screws A, and

then lower the adjuster.

Preventing the projector

from falling:

Drop-prevention wire

(included)

Adjuster

Installation to the security bar

Drop-prevention wire

(included)

1. Wind the included drop-prevention wire around

the security bar as shown in the illustration.

2. Wind the drop-prevention wire around the bar

one more time.

Screws A (included) ... 2

3. Attach the drop-prevention wire to the projector

attachment with the two included screws A.

Security bar

Wind around

one more time.