Canon LV-X2 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Canon LV-X2. Canon LV-X2 44 stron. Svga & xga models
Również dla Canon LV-X2: Broszura i specyfikacje (2 strony), Broszura i specyfikacje (2 strony)

Drukuj stronę

Before operating this projector, read this manual thoroughly to operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to

manage those features and maintain it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other

accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try

the solutions in the "TROUBLESHOOTING" section in the end at this manual. If the problem still persists, contact the

sales dealer where you purchased the projector or the service center.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

G This projector produces intense light from the projection lens. Do not stare directly into the lens as it could

possibly damage your eyes. Be especially careful that children do not stare directly into the beam.

G This projector should be set in the way indicated. If not, it may result in a fire hazard.

G Take appropriate space on the top, sides and rear of the projector

cabinet for allowing air circulation and cooling the projector.

Minimum clearance must be maintained. If the projector is to be

built into a compartment or similarly enclosed, the minimum

distances must be maintained. Do not cover the ventilation slot

on the projector. Heat build-up can reduce the service life of your

projector, and can also be dangerous.

G Do not put any flammable objects or spray cans near the projector, hot air is exhausted from the ventilation

holes.

G If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

TO THE OWNER

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT

OPERATING AND MAINTENANCE INSTRUCTIONS IN THE

OWNER'S MANUAL WITH THIS UNIT.

SIDE and TOP

20cm

50cm

REAR

50cm