Dormakaba 7400 SISJH Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System otwierania drzwi Dormakaba 7400 SISJH. Dormakaba 7400 SISJH 10 stron. Applied door closer, spring stop arm for regular
Drukuj stronę
dormakaba 7400 SIS, SISJ, SISH, SISJH Installation Instructions
2.2 Securing main arm to door/frame
Fig.3
Pinion
screw
Pinion
Damper
Adjusting
tube
2.2.1
Secure adjusting tube to damper.
•
Use one 7/8" x 1/2" torx head shoulder bolt provided.
2.2.2
Secure damper assembly to frame.
•
Use two 5/16" x 2" flat head screws
[#20 x 2" flat head wood screws] provided.
2.2.3
Secure main arm to operator pinion.
2.2.4
Use a torque wrench (25 ft-lbs) and provided pinion
screw [M8 x 30 socket head cap screw].
2.3 Securing main arm to closer
Fig.4
Door
Damper
assembly
Main arm
Hinge
2.3.1
Slide end of connecting arm into end of damper
assembly.
7400 Surface Applied Closers
Non-hold open
Main/
connecting
arm assembly
Adjusting
tube
Damper/
Damper
assembly
Right hand
door shown
7/8"x1/2"
torx head
shoulder bolt
Right hand
door shown
Connecting
arm
08279501
Hold open
plate
Right Hand (RH)
Configuration
Plate pointing to the
RIGHT
Hold open
Main/
connecting
arm assembly
Damper
NOTE: To disassemble hold open plate:
2.2.5
Remove both screws from bottom of plate using a 3/16"
hex key.
2.2.6
Keeping all washers in place, flip plate over to orient as
per image above.
2.2.7
Re-secure plate with both screws.
2.3.2
Secure connecting arm and damper assembly.
2.3.3
Use provided fastener [5/16-18 x 3/8 hex bolt].
Regular mount
Left Hand (LH)
Configuration
Plate pointing to the
LEFT
Pinion
screw
Pinion
Right hand
door shown
Right hand
door shown
5/16-18 x 3/8"
hex bolt
01-2021
5