Canor PH 2.10 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Canor PH 2.10. Canor PH 2.10 6 stron. Phono tube preamplifier

Basics

Plug the power cord in PH 2.10. Turn on the PH 2.10 with the Power Main switch, which is located on the back

panel. When you turn on the main switch, the PH 2.10 will set into stand-by mode - the red LED diode on the

front panel lights up. After pressing the Power button controlled turning-on sequence gets initiated, which

consists of cooling and preheating the tubes, thereby extending their life span. The cooling cycle is also being

carried out when the unit is turned off, if the main switch on the back panel is not turned off, i.e. after turning off

via button on the front panel, and 45-second countdown to cooling without indication begins. If you turn on the

unit at this time, the cooling will continue and will be indicated by flashing red LED. When the cooling cycle is

over then the main toroidal transformer gets connected (the CANOR logo lights up), and then the slow start-up

of voltage begins. This cycle lasts 20 – 30 seconds.

Specificatons :

MM:

MC:

Output Impedance:

Inputs:

Outputs:

Total Harmonic Distortion:

Subsonic Filter:

RIAA Accuracy:

Signal-To-Noise ratio MM:

Signal-To-Noise ratio MC:

Tube Complement:

Power:

Dimensions (WxHxD):

Weight:

Guarantee conditions:

Your CANOR PH 2.10 Phono Tube Preamplifier is guaranteed against any defect in materials and workmanship

for a period of 24 months from the date of purchase except for audio vaccum tubes that are covered by warranty

for a period of three months.

The warranty only applies if an original proof of purchase and acknowledged certificate of warranty can be

furnished. The warranty covers defects in materials and labor, but does not cover misuse, unauthorized

modifications, and external causes such as acts of nature.

50,150,270,370,520,620,740 and 840 pF / Gain: 46dB

10,20,40,80,150,300,600 and 1200 Ohm / Gain: 70dB

500 Ohm

RCA – MM / RCA - MC

RCA

MM / MC <0,2% / 1V RMS

18dB / Octave

0,3dB / 20Hz – 20kHz

84dBV

80dBV

2x 12AX7 , 2x 12AT7

230V / 50Hz / 50VA

435 x 120 x 405 mm

14 kg