Boly SG520 Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Kamera zwiadowcza Boly SG520. Boly SG520 6 stron. Infrared digital scouting camera
Również dla Boly SG520: Podręcznik użytkownika (18 strony)

Drukuj stronę

2.4 Camera Modes

The different modes are accessed by pressing the OK button, marked on the camera:



OFF Mode

To turn off the camera, when the display screen is active, press and hold the OK button until the screen

powers off. The camera will still consume a small amount of power while in OFF mode. It is

recommended to remove the batteries if the camera will not be used for a long period of time.



ON Mode

To turn on the camera, press and hold the OK button, until the display screen activates. Camera will take

pictures or video when motion is detected and/or at specific time intervals, according to the programmed

settings. After switching the camera to the ON position and if the camera is left alone for more than 10

seconds, the camera will automatically switch to Hunting Mode, as described below.



Hunting Mode

This mode is when the camera is turned on and is now available to capture photos and video. Hunting

mode is automatically activated, if the camera is turned on and left alone for more than ten seconds.

Before activating hunting mode, the motion indicator LED (red) will blink for about 10 seconds and then

turn off. This preset time allows you to adjust the cameras position if needed, before the camera becomes

active. To "wake" the camera and access the camera menu functions, press and hold the OK button,

until the display becomes active.

2.5 Trigger Modes

There are 3 different trigger modes for the camera: PIR Trigger/Sensitivity, Time Lapse, and a combined

PIR/Time Lapse mode. These modes are activated by three different menu options (PIR Trigger/Sensitivity, PIR

Interval, and Time Lapse).



PIR Trigger/Sensitivity

The camera will activate when motion is detected. If the PIR Trigger/Sensitivity option is set to OFF, the

camera will not respond to any motion within the camera's range.



Time Lapse

The camera will activate at the set time interval regardless of motion detection. If the Time Lapse option is

set to OFF, this trigger function will be disabled.



Combined PIR/Time Lapse

For the combination of both PIR and Lapse triggering, the following settings must be set correctly:



PIR Trigger/Sensitivity must NOT be set to OFF



The Time Lapse interval must be set to a non-zero value.

The camera will capture pictures or video when motion is detected and at the preset time, regardless of

motion detection.

Additional PIR settings to note:



PIR Interval

This setting indicates how long the PIR sensor will be disabled after each camera triggering. During this

interval time, the camera will not react to any detected motion or activate at the scheduled Time Lapse

interval.

Further detailed information about the trigger modes can be found in Camera Setup Options section of the

manual.

Boly Inc. | User Manual

SG520 Series Trail Camera

03/01/2017