Advance acoustic PIR3 Instrukcje

Przeglądaj online lub pobierz pdf Instrukcje dla Akcesoria Advance acoustic PIR3. Advance acoustic PIR3 2 stron.

PIR3

Instruction

Welcome to use SSEN/CS/ST/WH infrared motion sensor!

This ceiling mounted PIR sensor utilizes a good sensitivity detector and integrated circuit for

energy-saving, safety and practical functionality. It utilizes infrared technology to detect movement of

the human body and will switch on the load once someone enters the detection field. It has an inbuilt

photocell to detect between day and nighttime operation.

SPECIFICATION:

Power Source: 110-240V/AC

Power Frequency: 50/60Hz

Ambient Light: <3-2000LUX (adjustable)

Time Delay: Min.10sec±3sec

Max.7min±2min

Rated Load: Max. 400W (220-240V/AC)

200W (110-130V/AC)

200W (220-240V/AC)

100W (110-130V/AC)

FUNCTION:

➢

Can identify day and night: The installer can adjust the switching point at different ambient light

levels. It can operate in both day and night when the dial is set to the "sun" position (max). It

can work at night only when the dial is set towards the "3" position (min). As for the adjustment

pattern, please refer to the testing pattern.

➢

Time-Delay is extended continually: During periods of continued occupancy, the sensor will

restart the time delay with each detection of movement.

Good sensitivity

INSTALLATION ADVICE:

As the detector responds to changes in temperature, avoid the following situations:

➢

Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors etc.

➢

Avoid mounting the detector near heat sources, such as heating vents, air conditioning units,

lights etc.

➢

Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall

plants etc.

Detection Range: 360°

Detection Distance: 8m max(<24℃)

Working Temperature: -20~+40℃

Working Humidity: <93%RH

Power Consumption: approx 0.5W

Installation Height: 2.2-4m

Detection Moving Speed: 0.6-1.5m/s

Poor sensitivity