Advance acoustic AP1000.50.03 Instrukcja montażu, użytkowania i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja montażu, użytkowania i konserwacji dla Odkurzacz Advance acoustic AP1000.50.03. Advance acoustic AP1000.50.03 20 stron.
Drukuj stronę
5 PROPER USE OF THE PRODUCT
The vacuum unit has been designed to be installed for the pneumatic transport of pellets or
English
other biomass fuels with a medium-fi ne size;
it can move a large amount of air into the pipes connected, allowing the solid fuel to be
transported together with the air.
This product is suitable for working with biomass fuel such as pellets, olive pomace,
crushed shells of dried fruit, corn, but it cannot work with fuels having a very fi ne
size, or having excessive dimensions and, in any case, having lengths over 40 mm or
diameter greater than 15 mm.
It is recommended to use only ENplus A1 certifi ed pellet.
The vacuum unit must be installed above the boiler tank.
It is equipped with a panel for the regulation and the control of all the system functions
of the fuel pneumatic transport: this panel can be controlled directly from the boiler, if the
manufacturer has provided it (see boiler use manual).
The vacuum unit moves the fuel from the main storage tank to the boiler tank on which it has
been installed continuously and automatically; it is already equipped with a dispenser and all
the systems for the adjustment and the operation safety.
The product is suitable to serve boilers with a maximum power of 100 Kw/h and with a fuel
consumption lower than 25 kg/h.
6 INSTALLATION
It is the installer's responsibility to verify the presence of any risk of danger in the
installation area and to determine the suitability in accordance with both the applicable
laws and the product characteristics described in this manual.
The installer must also comply with the requirements of this manual as well as inform the user
of the operation and maintenance of the installed products and report any dangers related
to their use.
It is necessary to leave a free space of adequate size all around the product, in order to permit
any repair, maintenance or inspection operation.
The product should not be exposed to atmospheric agents and should not be installed in
areas subject to high humidity, possible fl ooding, high temperatures and dust presence.
9
31/05/2021 Rev:1.0.4