Dafra DNPB328 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Narzędzia Dafra DNPB328. Dafra DNPB328 10 stron. Rivnut tool
Również dla Dafra DNPB328: Instrukcja obsługi (10 strony)
Drukuj stronęDNPB328 Operation Manual
c) Use a spanner to loosen the connect sleeve (#3) from the spring house (#5), take out the
mandrel (#1), transfer bar washer (#63), connect sleeve (#3), transfer bar (#4) and spring
(#6):
d) Take the transfer bar washer (#63) out and insert the required mandrel (#1) from the tool
accessories pack as per rivnut size, then mount into the connect sleeve (#3), transfer bar
(#4), together with spring (#6) install into the spring house (#5). Screw the connect sleeve
(#3) tight with spring house (#5) using a spanner:
e) Screw the knurled cover (#12) and nose pedestal (#10) back to the tool, then replace the
locknut (#65), and anvil (#2):
MANDREL PROTRUDING SET FOR BLIND NUT
1) Adjust the length of the mandrel (#1) that protrudes from the anvil (#2) according to the length
of the rivnut to be set by adjusting the position of the locknut (#65), and anvil (#2) screwed
on the mandrel (#1):
2) Never set the mandrel protruding length too long or too short for the rivnut to be set:
All manuals and user guides at all-guides.com