Dot-Spot eco 230 V Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oświetlenie krajobrazu Dot-Spot eco 230 V. Dot-Spot eco 230 V 12 stron.

Assembly

2. Assembly with mounting bracket (enclosed)

Please remove first the steel peg and the spot from the assembly bracket, by declamping the screws.

Mark the position of the hole for the assembly bracket on the surface. Drill a hole in the ground and

equip it with a suitable plug. The included plug is suitable for mounting on substrates made of con-

crete, stone and masonry. For wood surfaces, the mounting angle can be mounted directly with an

appropriate screw with using the plug. In the case of hardwood it may be useful drilling a hole before

mounting. Place the mounting bracket right over the plug,

align in the desired direction and tighten it up with an appropriate screw. Now the LED garden spot

230 V can be attached to the mounting bracket. Plug an appropriate screw through the hole of

the mounting bracket and fix it laterally with a hexagon-wrench into the threaded hole on the light

housing. Adjust the spotlight before tightening into the desired direction.

3. Using the installation extension (optional)

The mounting extension is intended to be used together with the ground spike. Mounting extensions

can be combined.

Screw the mounting extension onto the ground spike using the threaded pin. Tighten the mounting

extension: To do this, use a pair of pliers and enclose a cloth or similar so as not to scratch the

mounting extension.

Then screw the mounting bracket of the light onto the mounting extension using the screw and

snap ring supplied with the ground spike. The snap ring is placed between the screw head and the

mounting bracket. Align the mounting bracket before tightening.

Connection with 230 V safety contact socket

eco 230 V, 6W

safety contact socket

230 V 50 Hz

5 m

Connection of the spot

1. Place the LED garden spot on the appropiate area.

2. Lay the power line in direction of the socket-outlet.

3. Put safety plug into power socket - Ready.