DAGE-MTI HR120 Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor DAGE-MTI HR120. DAGE-MTI HR120 13 stron. Monochrome monitor

Introduction

The DAGE-MTI HR120 monochrome monitor provides

a cost-effective method for viewing video images in almost

any environment. The rugged construction of these monitors

allows them to be used in a variety of situations. The wide

range of contrast and brightness ensures that a clean, crisp

image will be available for those difficult images. The front

panel allows access to all of the critical controls needed

DAGE-MTI offers our customers state-of-the-art video

technology... with an eye on your image.

Installation

The HR120 is equipped with rubber feet and may be

installed on any horizontal surface such as a desk, bench, or

table. Connection of the monitor to the video source is with

BNC coax cables and is dependent upon whether the video

signal will terminate at the monitor or continue to another

place. The rear panel

video to either be terminated in 75Ω or left in a high impe-

dance state for looping to another location. Always ensure

that the video signal is eventually terminated into 75Ω.

Do not install this monitor in an excessively hot location,

or in any way obstruct the ventilation holes located on the

bottom and rear of the cabinet.

With the exception of the picture tube, the monitor

incorporates all solid state circuitry. General maintenance

therefore will not be required. However, for optimum picture

clarity, it is recommended that the viewing screen be

periodically wiped clean with a damp cloth.

IMPEDANCE

switch allows the input