Dagger Touring Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Łódź Dagger Touring. Dagger Touring 20 stron. Recreational kayak
Również dla Dagger Touring: Instrukcja obsługi (16 strony), Instrukcja obsługi (12 strony)
Drukuj stronęCREEK SEAT ADJUSTMENT
For ultimate strength some Dagger whitewater
boats are fitted with the creek seat.
1
Loosen, but DO NOT remove, five seat adjust-
ment screws.
2
With both hands, slide the seat assembly fore or
aft to the desired location.
3
Tighten five adjustment screws securely.
Seat
adjustment
screw
Seat
adjustment
screws
PLAY SEAT ADJUSTMENT
For lightweight connection some Dagger
whitewater boats are fitted with the play seat.
1
Unfasten the upper back band straps.
2
Loosen the seat adjustment knob by turning five
to six times but DO NOT remove it.
3
With both hands positioned as shown, press
down on the rear adjustment knob and slide the
seat assembly foward or back.
4
Tighten the adjustment knob securely.
5
Fasten both upper back band straps.
Seat
adjustment
screws
O
UTFITTING:
HIP PAD ADJUSTMENT
For increase your contact with the boat, the
hip pads can be adjusted.
1
Disconnect two buckles.
2
Swing hip pad upward.
3
Insert foam padding into the pocket on the back
of the hip pad.
4
After you have inserted as much foam padding
as desired, reseal and lower hip pad and Velcro®
into desired position, FASTEN BOTH BUCKLES,
and tighten the straps.
5
Stow the straps by wrapping them back behind
the buckles and fastening to the Velcro® tabs.
6
Never allow your outfitting to impair exit in an
emergency.
Foam pad
Hip pad
Buckles
S
EAT
7