Dahl VARIODOCK Podręcznik konserwacji - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik konserwacji dla Stacja dokująca Dahl VARIODOCK. Dahl VARIODOCK 19 stron.

Drukuj stronę

Examples of installation of retractor and bracket

(D-loop) for anchoring of shoulder belt

Please see separate installation guide for mounting of anchoring kit

for shoulder belt for each vehicle.

Example with 178 mm height adjustment

Art. no. 500945.

Example with the retractor installed in

the vehicle floor.

Maintenance manual, installation and user guide UK

Example with the retractor installed on the wall.

Here, examples are shown of the

proper orientation (90°/90) of the

D-loop and retractor for both floor

and wall mounted retractors.

It must be possible to rotate the

D-loop for the shoulder belt when

the bolt is tightened.

Installation of safety belts

Please also refer to separate installation instructions for

the safety belt concerned. We have safety belt anchor-

age kits available that have been tested in accordance

with ECE regulation 14.

Please enquire about our current range of kits.

Seat belts must, as a starting point, ALWAYS be anchored in the vehicle floor, not on the

wheelchair.

WARNING! Risk of death or serious injury

The docking station and vehicle-specific anchorage kits are designed and tested on condi-

tion that the seat belt is anchored to the vehicle body and floor, not on the wheelchair.

In the event of a collision, a wheelchair with an integrated safety belt will expose the dock-

ing station and vehicle floor to a much higher torque / load than a wheelchair where the seat

belt is anchored to the vehicle's body and floor.

Thus, there is a risk that the wheelchair user and other passengers in the vehicle can suffer

severe or fatal injuries during a collision, as a result of the vehicle floor being deformed

severely or the anchoring points of the docking station being torn loose. Therefore never

use the docking station for anchoring a wheelchair with integrated seat belt anchor points,

whether this is a 3-point belt, an H- or lap belt.

Examples of seat belt

#500984

components

#500984

500984

Seat belt

501768

Removable safety belt

buckle with fitting

501762

Safety belt buckle for

permanent mount

Safety belt buckle can be orde-

red in different lengths. Please

ask about the current range.

Dahl VarioDock™