DOTWORKZ COOLDOME Series Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kamera bezpieczeństwa DOTWORKZ COOLDOME Series. DOTWORKZ COOLDOME Series 16 stron.
Drukuj stronę
COOLDOME™ Input Power Configuration: ST-CD-12VDC
Site Power Available
110 – 220 VAC Power Source
Single Phase Only
Turn Off Power or leave power disconnected during Installation of All Wiring.
Test all Wiring and confirm correct voltages before wiring up & powering up ST COOLDOME.
Select Input Voltage before
Hooking up Power Supply
110 VAC or 220 VAC
Rear of Power Supply with
Input Voltage Selector
High Voltage A/C Input, Single Phase, USA Wiring Color Code
Color
Symbol
Black
L
White
N
Green
G
LOW VOLTAGE RUN: Wire Gauge Chart for ST & D2 CD – 400 BTU Cooler
Provided P/S Must be
Housed Indoors, or in a
Nema Electrical Enclosure
250 watt Step Down P/S
High Voltage to 12 VDC
Follow all local and relevant electrical codes & standards.
Description
Line Conductor, AKA Live, Hot
Neutral Conductor
Ground Conductor, Safety Ground
LOW VOLTAGE RUN
12 VDC Cable to
COOLDOME
Front of Power Supply with
terminal strip
Low Voltage 12 VDC Output Terminals
Color
Red
Black
11
Symbol
Description
+, V+
Positive VDC
-. V-
Negative VDC