Double K Industries ChallengAir AIRMAX Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Double K Industries ChallengAir AIRMAX. Double K Industries ChallengAir AIRMAX 4 stron.

Drukuj stronę

Congratulations!

You've just purchased the Double K CHALLENGAIR AirMax Forced Air Dryer, which

produces warm, high velocity air under pressure to make your animal grooming tasks easier.

Your new dryer is designed to provide long, reliable service.

Please read this manual carefully and completely before beginning operation of your dryer and

keep this manual in a convenient and safe place for future reference.

A warranty card is included with your dryer and should be filled out completely and mailed to

Double K Industries within 30 days of the purchase date of your dryer to validate your warranty.

Online registration available at

www.DoubleKIndustries.com

Your CHALLENGAIR AirMax has a two year warranty covering the unit against defects in

materials and workmanship. Regular maintenance items such as brushes and filters are not

included (see warranty card for complete warranty information). It is also important to retain

your sales receipt as proof of purchase should service ever be needed.

Your CHALLENGAIR AirMax has two brush-type motors. It is important that the brushes be

changed when they become worn down to prevent damage to your dryer motor (brushes are

maintenance components and are not covered under the warranty). We suggest checking the

motors brushes after every 500 hours of dryer use. Please see section on BRUSHES in this

manual for instructions.

A NOTE ABOUT HEAT: Your CHALLENGAIR AirMax has no heating element. The

CHALLENGAIR AirMax produces heat by a "flow-thru" motors system, meaning the air is

pushed through the motors and is warmed by the natural heat of the motors that occurs during

operation. This means greater electrical savings and efficiency for you. The dryer will reach its

maximum air temperature after about 2-4 minutes of operation. (Note: The higher the room

temperature, the warmer the air from the dryer will be.)

ASSEMBLY

To attach hose to dryer: Your dryer hose has a black hose adapter that will screw onto the hose

in a counter-clockwise motion. The adapter with hose attached then fits onto the dryer with a

half-twist motion that locks the adapter onto the dryer.

First place the adapter over the snout of the dryer with the Double K logo facing up then turn

hose counter-clockwise until the adapter locks in place, the Double K logo should then be sitting

horizontally.

To remove hose from adapter: Turn the hose clockwise.

ATTACHMENTS: Your dryer is equipped with one hose and 4 twist-on nozzles. To attach

nozzles to hose, twist the nozzles "counter-clockwise". Twist clockwise to remove.

OPERATION - Switches and Controls:

2-Speed:

Low Speed / Standard Heat - Turn on the top motor switch.

High Speed / High Heat - Turn on both motor switches.

Variable Speed (optional)

Maximum Output - Turn the dial speed control clockwise to its maximum.

Variable Output: - Turn the dial speed control clockwise to desired air output.

Off Position - Turn the dial speed control counter-clockwise until it clicks off.

REQUIRED MAINTENANCE

FILTERS:

(Procedures below must be performed regularly or as needed to protect dryer warranty status.)

FILTER CLEANING: Both the external and internal filters of the CHALLENGAIR AirMax

should be kept clean. If the filters become heavily coated with hair and/or dirt, it will reduce the

air output of your dryer and can cause damage to the motors or cause the motors to overheat.

*Never operate the dryer without all filters in place.

To clean external filter: Vacuum or shake off dirt and hair daily. Filter may be rinsed in water if

necessary. Let filter dry completely before reinstalling on dryer.

To clean the internal motor filter of the CHALLENGAIR AirMax:

Unplug dryer.

Slide off the back cover of the dryer. This is a compression fit and will come off with a little

effort.

The internal filter is housed inside of a two piece frame. ( Pull on finger tab at the center of

filter frame to remove)

To remove the filter between the two frames: use a flat head screw driver to pry up or

release the six snap-in tabs around the edge of the filter frame.

Clean motor filter disk by vacuuming off hair and dirt, or wash filter gently in cool water.

Shake off excess water and allow to air dry completely. (Replace filter if necessary)

Reassemble the two piece filter frame and replace it onto the motor assembly housing by

pushing it into place.

Replace dryer back cover.

Any maintenance not explained in this manual should be performed by Double K Industries or

an Authorized Service Center. Call Double K Industries for the name of an Authorized Service

Center nearest you. All warranty service must be performed by an Authorized Service Center

(or Double K Industries) to protect your warranty status.

Attachment List

Attachment

P/N

825-6, 8, 10, 12

or 15

896

897

2036

2068

Description

Qty.

Hose 1½" Black on Blue

1½" Air Sweep Nozzle

1½" Regular Nozzle

Hose to Dryer 1½" Locking Adapter

1½"-¾" Hi-Velocity Nozzle