DoubleSight DS-27PS Instrukcja szybkiej instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Stojaki i stojaki DoubleSight DS-27PS. DoubleSight DS-27PS 12 stron. Full motion single monitor arm, pole mount

Drukuj stronę

INSTALLATION

Using Cable Management Feature

1. Once you have connected your Monitor's Cabling you can use the built in cable management to organize your

cabling. Locate the Cable Channels on the underside of the LCD Arm. Simply push cables into the channel, leaving

sufficient slack so as not to pull out cables when LCD Arm is moved. (Figure 13)

2. Secure the cables in place by snapping the Cable Covers (7) into the Cable Channels. (See Figure 14)

3. Use the Cable Clip (6) to secure cables to the base of the Pole. (See Figure 15)

Figure 13

Figure 14

Figure 15

Model: DS-27PS