Doug Thorley Headers THY-470 Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria samochodowe Doug Thorley Headers THY-470. Doug Thorley Headers THY-470 4 stron. Nissan/ suzuki 4.0l, frontier, pathfinder, xterra/equator, 2005-14, 2/4wd

Drukuj stronę

PARTS INCLUDED

Ref.

TOOLS REQUIRED

Ref.

Description

12mm, 14mm Wrenches

12mm, 14mm Regualr and Deep sockets

Ratchet and Extensions

Crescent Wrench, Torque Wrench and Rust Penetrant

LEGALITY NOTE

The installation of headers onto any vehicle must be performed in accordance with all govern-

mental regulations that might pertain to the particular vehicle receiving the headers. Please

call your Doug Thorley Headers distributor if there are any questions regarding the legality of

the installation. The Executive Order ("E.O.") number for this part number is "PENDING".

INSTALLATION NOTES

1) It is important that you read the entire instruction sheet before initiating any installation.

2) Thorley headers are designed to fit only factory installed engine and transmission combi-

nations. We cannot guarantee that Thorley headers will fit in the case of "engine swaps" or

"transmission swaps".

3) Due to restricted room in the engine compartment, your headers may come close to cer-

tain body and chassis components. This is normal for an installation of this type. However,

a careful inspection must be completed to insure that the distances and placement are

reasonable and logical, especially with regard to electrical, fuel, and brake components.

4) Because of the requirement to raise the engine to facilitate header installation, the engine

mounts should be carefully inspected at that point of the installation. It is highly recom-

mended that questionable or deteriorated engine mounts be replaced during the

installation of the headers. In some cases, the engine mounts need to be loosened and

repositioned to provide optimum header clearance from some components.

5) Because of car-to-car variations, Thorley Headers strongly recommends that these

headers be installed by a competent exhaust shop that has welding and fabrication

capabilities.

THY-470

NISSAN/ SUZUKI 4.0L

FRONTIER, PATHFINDER, XTERRA/

EQUATOR, 2005-14, 2/4WD

Description

Driver Side Header

Passenger Side Header

M10x1.25x35mm Hex Flange Bolts

M10x1.25 Hex Flange Nuts

Qty