Baumer CleverLevel LBFS Series Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Baumer CleverLevel LBFS Series. Baumer CleverLevel LBFS Series 48 stron. Level measurement, point level detection
Drukuj stronę
CleverLevel
9.
Configuration
The sensor can be configured with the
FlexProgrammer. This allows switching points
and damping values to be selected as required. In
addition pulse width modulation can be specified
for the signal.
Examples for pulse width modulation
U
10%
U
50%
U
75%
10. Operation
Standard operation with factory settings
BU
BU = blue: Switched output, active
LED does not light up: Switched output, inactive
Application-specific settings: see chapter "15. Factory settings and user settings" on page 16.
12 / 48
Level measurement
®
LBFS
Point level detection
t
t
t
Operating Instructions
Configuring with FlexProgrammer and PC
Connect FlexProgrammer to sensor.
f
Connect FlexProgrammer to PC and set
f
parameters (see FlexProgrammer instructions).
Copying configuration with FlexProgrammer
Copy the configuration of one sensor to
f
another sensor using FlexProgrammer (see
FlexProgrammer instructions)
1
2
LED indication for "Power-On"
BU
BU = blue: Switched output, active
GN = green: Switched output, inactive
A green LED can be activated indicating „Power-
On" by using the FlexProgrammer.
GN
www.baumer.com