Baumer Hubner GT 9 Instrukcja montażu i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Akcesoria Baumer Hubner GT 9. Baumer Hubner GT 9 28 stron. Tachogenerator

Security indications

2.1

Risk of injury due to rotating shafts

Hair and clothes may become tangled in rotating shafts.

• Before all work switch off all voltage supplies and ensure machinery is stationary.

2.2

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces.

• Never restrict the freedom of movement of the device.

The mounting instructions must be followed.

• It is essential that the specified clearances and/or angles are observed.

2.3

Risk of destruction due to mechanical shock

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.

• Never use force.

Mounting is simple when correct procedure is followed.

• Use suitable puller for dismounting.

2.4

Risk of destruction due to contamination

Dirt penetrating inside the device can damage the device.

• Absolute cleanliness must be maintained when carrying out any work on the device.

• Never allow lubricants to penetrate the device.

2.5

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the magnets and the carbon brushes. Dismounting a device, se-

cured to a shaft by adhesive may lead to the destruction of the device.

2.6

Explosion risk

Do not use the device in areas with explosive and/or highly inflammable materials.

They may explode and/or catch fire by possible spark formation.

MB023 - 11055627

Baumer_GT9_II_DE-EN (19A1)

Securtiy indications