Baumer O200 Instrukcja obsługi - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Baumer O200. Baumer O200 34 stron. Sensors with io-link

Dynamic in Window Mode (Only O200.G)

5.3.2

If the selected SSC is configured to Window mode (Section 4.3.2.1) during the dynamic teach-in the

minimum and maximum values are evaluated. Setpoint SP1 is set to Min, SP2 is set to Max.

In addition to solving the primary application, the simple evaluation of secondary data, such as temperature,

supply voltage or operating time, allows for predictive maintenance and thus optimum machine availability.

Parameter name

Device Status

Detailed Device Status

An integrated temperature sensor allows to track the internal temperature of the sensor.

Please be aware that compared to the ambient temperature the indicated values are higher due to the

internal heating of the sensor.

The temperature may also vary due to mounting conditions and due to the electric load connected to the

output.

Parameter name

Device Temperature.Current

Unit Selection.Temperature

en_BA_O200_IO-Link_V1.docx

15.08.2018/

Figure 29: Dynamic Window Teach, switching behavior

Short Description

Indicates if the sensor is

working properly

Short Description

Choice of temperature unit

(Default: °C)

32/34

Rights

Unit / Allowed

values

0=Device is OK

2=Out of

Specification

4=Failure

Rights

Unit / Allowed

values

°C, °F, K

Baumer Electric AG

Frauenfeld, Switzerland