Dahua F Series Skrócona instrukcja obsługi - Strona 6

position. Put the three self-tapping screws in the three plastic expansion bolts firmly. Fix dome body on

installation surface.

Step 5

Hold both sides of the rotation bracket bottom with hands, rotate horizontally along the axis, and adjust

lens horizontal direction to designated position. Hold the LED decoration cover with hand, rotate along

the vertical direction, adjust the lens vertical direction to designated position; it is okay to loosen the fix

screws on both sides of the bracket first if it is too tight to adjust (just make it loose, do not take it

down), then adjust the lens, tighten the fix screws after adjustment. Hold the LED decoration cover

with hands, rotate horizontally along the axis, and adjust the lens image to designated position. Range

of lens: vertical (0°～+64°), horizontal (0°～+355°), image rotation direction (0°～+355°).

Note:

When it rotates to 64° vertically, please pay attention to the image rotation direction in order to avoid

the outer cover blocking IR light and influencing IR effect.

Note:



This quick start guide is for reference only. Slight difference may be found in user interface.



All the designs and software here are subject to change without prior written notice.



All trademarks and registered trademarks mentioned are the properties of their respective

owners.



If there is any uncertainty or controversy, please refer to the final explanation of us.



Please visit our website or contact your local service engineer for more information.

Zhejiang Dahua Vision Technology Co., Ltd

Address：No.1199 Bin'an Road, Binjiang District, Hangzhou, PRC.

Postcode: 310053

Tel: +86-571-87688883

Fax: +86-571-87688815

Website: www.dahuasecurity.com