Dahua F Series Skrócona instrukcja obsługi - Strona 10

Dahua HD IR Network Dome Camera Quick Start Guide

Note:

Please install the device seal ring back to the dome body bottom after Micro SD card is installed.

4. Use the cross screwdriver to tighten back three screws on the dome body, and put the dome body

back into the dome enclosure.

5. Use the cross screwdriver to tighten back four screws on the dome body bottom, and install back

the compression cover.

Step 4

It is to select whether it is to run the wire through bottom or side, and insert multi-function cable into

exit hole on installation surface.



Bottom wiring: select to lead out the cable through ceiling or wall, which can protect the cable

effectively.



Side wiring: select to lead out the cable through side exit and add metal conduit etc., which can

prevent the cable from being destroyed.

Please refer to figure 2-4 and 2-5 for more details about bottom wiring and side wiring respectively.

Figure 2-3