Dahua F Series Skrócona instrukcja obsługi - Strona 7

Dahua HD IR Bullet Network Camera Quick Start Guide

1.2 Dimension

Note

The following figure is for reference only, which is only used to know the device

dimension.

Refer to Figure 1-2 for the dimension of the device. The unit is mm (inch).

Note



Some products do not support bidirectional talk, which cannot be applied to this

chapter.



On-site monitoring can't be used when the device is applying bidirectional talk.

Step 1 Connect the speaker or the MIC to the audio input port of the device and PC;

connect the earphone to the audio output port of the device and PC respectively.

Step 2 Log in the device WEB interface, click "Talk" button to enable bidirectional talk.

You can see the button becomes orange after you enabled the audio talk

function. Click "Talk" button again to stop the bidirectional talk function.

Step 3 Input audio to speaker or MIC on the device end and PC respectively, and

receive the audio via earphone on the device end and PC.

Note:

It is only supported by some series products.

Table 1-2

Figure 1-2