Dahua H Series Skrócona instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kamera bezpieczeństwa Dahua H Series. Dahua H Series 19 stron. Ir bullet network camera
Również dla Dahua H Series: Skrócona instrukcja obsługi (20 strony), Skrócona instrukcja obsługi (20 strony), Skrócona instrukcja obsługi (19 strony)

Device initialization and IP address setting can be finished with the "ConfigTool" or on web interface.

For more information, see the Web Operation Manual.

Device initialization is available on select models, and it is required at first use or after the device



being reset.

Device initialization is available only when the IP addresses of the device (192.168.1.108 by



default) and the PC stay in the same network segment.

Plan useable network segment properly to connect the device to the network.



The following figures and interfaces are for reference only, and the actual product shall prevail.



2.1

Step 1

Double-click "ConfigTool.exe" to open the tool.

Step 2

Click

The Modify IP interface is displayed. See Figure 2-1.

Step 3

Click Search setting.

The Setting interface is displayed.

Step 4

Enter the start IP address and end IP address of the network segment in which you want to

search devices, and then click OK.

All the devices found in the network segment are listed.

Select one or several devices whose Status is Uninitialized, and then click Initialize.

Step 5

Network Configuration

Figure 2-1

Modify IP

Quick Start Guide